Burn time is approximately one hour per inch of length. To start trim wick to ¼”, wick is self-trimming after that. To prevent dripping, keep away from open windows, fans or excessive air flow. DO NOT trim the burnt wick before each use. Just light the long curled wick & the wick will self trim as it burns. Never leave a burning candle unattended. Burn in fire resistant holders.

Votives are ready to  light from the box, straighten wick & light. No need to trim between uses. Burn votives in a heat resistant container, glass ceramic or metal, just wide enough to fit. Votives are designed to spill out & develop a molten pool which fills the container. Never leave a burning candle unattended.

Tea Lights are ready to light from the box, straighten wick and light. Tea Lights are designed to be burned in the plastic cup they come in. No need to trim between uses. IMPORTANT, burn the tea light in its plastic cup on a fire resistant surface or container. Never leave a burning candle unattended.

These jar  candles are ready to light from the box. Trim wick to ⅛”-¼” with each additional use. For best results, burn for 2-3 hours each use. Never burn candle for more than 4 hours at a time. If the wick becomes too long or uncentered, extinguish flame, center wick if needed, let candle cool. Trim wick & relight. For safety, burn glass containers on a fire resistant surface. DO NOT touch or move the container until it has cooled down. Never leave a burning candle unattended.

Travel Tins are ready to light. Trim wick to ⅛”-¼” with each additional use. For best results, burn 2-3 hours each use. Never burn candle for more than 4 hours at a time. If the wick becomes too long or uncentered, extinguish flame, center wick if needed, let tin cool.Trim wick & relight. For safety, burn tin on a fire resistant surface. DO NOT touch or move tin until it has cooled down. Never leave a burning candle unattended.

To start, remove all labels & trim wick to ¼”. Trim wick to ⅛”-¼” before each use. To avoid tunneling with the 3” Pillar, burn for 2.5 - 3 hours per burn. To avoid tunneling with the 4” Pillar, burn for 3.5- 4 hours per burn. Once extinguished, mold the warm sides of the pillar inward toward the wick. This technique is called hugging or collaring. Collaring the pillar will extend the overall burn time. If the wick becomes too long or uncentered, extinguish flame, let cool, trim and center wick, relight. IMPORTANT, for safety, burn pillars on a fire resistant surface, like a saucer to catch any potential dripping wax. Never leave a burning candle unattended.

Place fire starter right side up, approximately one inch below dry firewood. Light top edge of fire starter. Our fireplace starters are great for indoor fireplaces, wood burning stoves,  outdoor campfires,  bonfires, and barbecue briquettes.